/

NAGRA
Tube Dac Package ( Tube Dac +Classic PSU )

$57,000.00

Description ▴

Tube Dac

Power supply is a critical part of any audio design. Somehow it sets the upper limit of the quality that the product will be able to provide. Our company has always been extremely knowledgeable about power supply as designing high-quality portable power supply is a real challenge.

The Classic PSU is inspired by the PL-P battery power supply, where the battery is replaced by a bank of super capacitors. Super capacitors are becoming more and more popular as they offer the advantages of a battery without having to worry about charging or battery’s life.

Classic PSU

Power supply is a critical part of any audio design. Somehow it sets the upper limit of the quality that the product will be able to provide. Our company has always been extremely knowledgeable about power supply as designing high-quality portable power supply is a real challenge.

The Classic PSU is inspired by the PL-P battery power supply, where the battery is replaced by a bank of super capacitors. Super capacitors are becoming more and more popular as they offer the advantages of a battery without having to worry about charging or battery’s life.

Product Specifications ▾

Tube Dac

Internal Processing  11.2 MHz, 72 Bits
Compatible Digital Formats PCM 24 bits up to 384 kHz, DXD, DSD 256
Bandwidth 5Hz to 40 kHz (+0 – 3dB)
Noise Level 128 dBr (linear)
Interchannel Phase <0.5° at 20 kHz
Distortion < 0.02% (at -20dBFS)
Digital inputs 2 x S/DIF, 1 AES/EBU, 1 Optical, 1 Audio USB (mode 2), 1 x I2S (Nagra format)
Outputs 1 stereo on RCA connectors, 1 stereo XLR
Dimensions 280 x 350 x 76mm (12 x 13.7 x 3 inches)
Power Supply Compatible with Nagra PSU and Nagra MPS

Classic PSU

Compatibility Nagra CDC, CDP, CDT, HD DAC, CLASSIC DAC, TUBE DAC, BPS, VPS, CLASSIC PHONO, MELODY, JAZZ and CLASSIC PREAMP
Outputs  1 to 3, 12 V DC, 1.5 A Lemo pin 2-3, GND contact – command Lemo pin 1
Linear noise 30 μV maximum No load – 10 Hz – 500 kHz
20 μV maximum Full load – 10 Hz – 500 kHz
Home automation input and outputs input : 1x 3.5 mm jack connectors – Input command, output : 3x 3.5 mm jack connectors – Output switching by relay
Mains supply 100, 115, 120, 127, 230 or 240 VAC, ±10%
Power consumption Maximum 100 W – In standby < 1W
DC cables Custom made shielded cable with high quality Lemo connectors, available in 0.75 or 1.25m lengths. Other lengths available on request.DC cable for the BPS, 1m.
Dimensions  350 (390 from nose of the modulometer to back of the connectors) x 277 x 80mm (15.4 x 10.9 x 3.2 inches) – Add 3cm or 1.2 inches with a VFS plate placed under
Weight 7.5 Kg (15.4 lbs.)

Related Products