/

CLEARAUDIO
NANO PHONO V2

$749.00

Description ▴

The nano phono V2 phonostage isn’t ruffled by anything. External interferences are no longer an issue with this fine piece of engineering. Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges. The nano phono headphone V2 additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.

Product Specifications ▾

AMPLIFICATION 34 dB (MM mode)
65 dB (MC mode)
INPUT LOAD 47 kOhm / 220 pF / MM mode
User MC mode
MM / MC INPUT switchable (at bottom)
SUBSONIC FILTER switchable (at bottom)
RIAA Nach RIAA (Zeitkonst.: 75 μs / 318 μs / 3180 μs)
RIAA ACCURACY ± 0.4dB @ 20Hz-50kHz
THD < 0,04%
HEADROOM 18 dB / MC
SIGNAL TO NOISE RATIO 81 dB (A) (MM – Mode)
70 dB (A) (MC – Mode)
CHANNEL SEPARATION > 80dB @ 1kHz
MAX. OUTPUT VOLTAGE 10V eff. (1kHz)
POWER CONSUMPTION Max. consumption: 2.3 Watt
in operation: 2.3 Watt
Standby mode: < 0.3 Watt
Off mode: 0.0 Watt
POWER SUPPLY ±18V DC / 300mA
(external power supply)
OUTPUTS unbalanced (RCA)
WEIGHT Approx. 500 g (preamp and power supply)
DIMENSIONS (W/D/H in inches) 3.35 x 4.17 x 0.98
DIMENSIONS (W/D/H in mm) 85 x 106 x 25

Related Products